
Temple Terrace Cabinet Refacing
Crown Molding Addition in Temple Terrace, FL
Crown molding addition in Temple Terrace, FL for cabinets. Matched profiles, clean miter cuts, and free estimates on every project.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Temple Terrace and nearby communities.
Cabinets without crown molding can look unfinished at the ceiling line, especially after a refacing job gives the doors a fresh update but leaves the tops looking plain by comparison. Crown molding addition caps that off with a profile that matches the new finish.
This works well as a finishing step paired with refacing, or as a standalone upgrade on cabinets that are otherwise in good shape. Temple Terrace homes built in the 1920s Mediterranean-Revival style often have trim detail elsewhere in the house that a matching molding profile can echo in the kitchen. Temple Terrace Cabinet Refacing measures and fits each run to the actual ceiling height and cabinet layout, not a generic length cut on site and forced to fit.
What's included
What's Included with Crown Molding Addition
Typically included: -
- Measurement of cabinet runs and ceiling clearance — Molding profile and finish selection -.
- Precision miter cutting and corner fitting — Installation and finish touch-up.
Optional
- Corner molding blocks for complex angle transitions
- Matching stain or paint blend to existing cabinet finish
- Molding on select runs only, rather than the full kitchen
Customer prep
- Decide on molding profile style ahead of the visit
- Clear countertop space below cabinet runs
- Note any uneven ceiling areas you're already aware of
Want a clearer scope?
Get a Free EstimateHow it works
How Our Crown Molding Addition Process Works
Step 1Space Measurement
Cabinet tops are measured to determine molding length and angles needed.
Step 2Molding Style Selection
Clients choose molding profiles that complement their cabinet design.
Step 3Cutting and Fitting
Molding pieces are cut to precise angles for proper corner fitting.
Step 4Surface Preparation
Cabinet tops are prepared to ensure secure molding attachment.
Step 5Molding Installation
Molding is attached and secured along the tops of cabinet runs.
Step 6Finish Touch-Ups
Seams and edges are finished to blend molding with existing cabinetry.
Materials
Materials and Methods for Crown Molding Addition
Molding choice should match both the cabinet finish and the home's existing trim style, which matters more in Temple Terrace's older Mediterranean-Revival homes than in a newer renovated kitchen.

Crown Molding Profiles
A range of profiles lets the molding echo detail already present in an older home's trim work.

Wood Molding Strips
Solid wood holds up well and takes stain or paint evenly to match refaced cabinet doors.

Molding Adhesive
Secures molding firmly even with the humidity swings typical of a Hillsborough River-area kitchen.

Finish Nails
Add mechanical support behind the adhesive bond, especially on longer runs.

Matching Stain or Paint
Blended to the cabinet's existing or new finish so the molding doesn't look bolted on.

Corner Molding Blocks
Simplify tricky inside and outside corners common in older, non-standard kitchen layouts.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Crown Molding Addition Take?
Molding work is usually a short add-on, longer if paired with a full refacing job that needs to cure first.
- 01
Measure and profile selection
same visit
- 02
Fabrication or ordering
3–5 days - 03
Install
1 dayfor a standard kitchen
Need a schedule that fits?
Get a Free EstimateCost
What Does a Crown Molding Addition Cost in Temple Terrace?
Pricing is driven mostly by linear footage and how complex the profile and corners are. Call for a free estimate based on your kitchen's layout.
| Project type | Typical range | What’s included |
|---|---|---|
| Simple profile, standard kitchen | $400–$900 | basic molding on main cabinet runs. |
| Detailed profile with multiple corners | $900–$1,800 | decorative molding with added fitting work. |
| Full kitchen with island and perimeter | $1,800–$3,000 | molding across all cabinet runs including the island. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and Codes for Crown Molding Addition
This is a cosmetic finishing addition and typically doesn't require a Hillsborough County permit.
| Typically needs a permit | Often no permit |
|---|---|
| None for cabinet molding installation | Measuring |
| — | cutting |
| — | fitting molding |
| — | Adhesive and nail installation |
| — | Finish touch-up work |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Crown Molding Addition
| DIY | Hire a pro |
|---|---|
| Installing a single straight run with no corners | Cutting clean miters on inside and outside corners without gaps |
| Basic caulking of seams on a simple, low-profile molding | Fitting molding to an uneven ceiling line common in older homes |
| Touch-up painting on an existing molding run | Matching stain or paint tone precisely to refaced cabinet doors |
| — | Handling multi-run kitchens with varying cabinet heights |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Crown Molding Addition
Call (727) 334-7614 for a free estimate, or request one through the contact form.
- Cabinets look unfinished or plain at the ceiling line
- You just finished a refacing job and want a matching finishing touch
- Existing molding is damaged, gapped, or mismatched to current cabinet finish
- You're updating a kitchen to better match the home's architectural style
Seeing warning signs?
Get a Free EstimateFAQs
Crown Molding Addition FAQs
How much does crown molding addition cost?
Most jobs run $400-$900 for a standard kitchen with a simple profile, up to $1,800-$3,000 for a full kitchen with an island and detailed corners.
Can I add crown molding without refacing my cabinets?
Molding addition stands alone and can be added to cabinets that are already in good shape.
How long does installation take?
Fitting and install typically take one day once the molding is ordered, with lead times of about 3-5 days for sourcing material.
Is crown molding a good DIY project?
Simple straight runs are manageable for DIY. Corner miters and uneven ceiling lines, both common in older homes, are where most DIY attempts run into trouble.
Will the molding match my existing cabinet finish?
We select and blend stain or paint to match your cabinet's current or new finish so it doesn't look like an afterthought.
More services
Other Cabinet Refacing services

Cabinet Refacing
Cabinet refacing in Temple Terrace with new doors, box veneer, and hardware matched to your kitchen. Free estimates, honest timelines.

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Temple Terrace, full-kitchen door and veneer updates without a full remodel. Free estimates available.

Bathroom Vanity Refacing
Bathroom vanity refacing in Temple Terrace with moisture-resistant finishes built for humid conditions. Free estimates.
Ask about Crown Molding Addition
Tell us about the project and how to reach you.