
Temple Terrace Cabinet Refacing
Commercial Cabinet Refacing in Temple Terrace, FL
Commercial cabinet refacing in Temple Terrace, FL. Durable materials, scheduled around your hours, free estimates for offices and rentals.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Temple Terrace and nearby communities.
Break rooms, rental unit kitchens, medical offices, and small commercial kitchens take more daily abuse than a home kitchen ever will. Commercial cabinet refacing swaps worn doors, drawer fronts, and box surfaces for materials built to handle that traffic, without the downtime or cost of ripping cabinets out and starting over. Temple Terrace Cabinet Refacing works with property managers and business owners around scheduling, not around our convenience.
Properties here run the gamut from older buildings near the original 1920s golf course district to newer renovated office and retail spaces, so cabinet box condition varies a lot from one job site to the next. We assess what's there and spec materials and hardware rated for the actual use case, not a residential-grade shortcut.
What's included
What's Included with Commercial Cabinet Refacing
Typically included
- Box inspection and commercial-grade material selection
- Door and drawer front replacement across all cabinet runs
- Reinforced hinge and heavy-duty slide installation
- Finish coating suited to high-traffic contact
Optional
- Antimicrobial surface coating for medical or food-service settings
- Impact-resistant panel upgrades for storage or break room units
- After-hours or weekend scheduling to avoid business disruption
Customer prep
- Clear cabinet contents before the scheduled start date
- Flag any plumbing or electrical fixtures near the work area
- Confirm building access hours with your point of contact
Want a clearer scope?
Get a Free EstimateHow it works
How Our Commercial Cabinet Refacing Process Works
Step 1Site Evaluation
Commercial spaces are assessed to plan refacing around daily operations.
Step 2Scheduling Coordination
Work is scheduled to minimize disruption to business activities.
Step 3Durable Material Selection
Commercial-grade materials are chosen for high-traffic durability needs.
Step 4Box and Surface Prep
Cabinet boxes are prepared to withstand frequent commercial use.
Step 5Refacing Installation
New surfaces, doors, and hardware are installed across commercial cabinetry.
Step 6Compliance Check
Finished work is reviewed to ensure it meets commercial use standards.
Materials
Materials and Methods for Commercial Cabinet Refacing
Commercial jobs call for tougher specs than a residential kitchen, especially in buildings that see heavy foot traffic or shift-based staff turnover.

Commercial-Grade Laminate
Heavy-duty laminate withstands frequent use and the Tampa Bay humidity that settles into break rooms and back-of-house areas.

Reinforced Hinges
Built to handle repeated daily opening in offices and rentals without loosening or sagging over a few months.

Impact-Resistant Panels
Resist dents from carts, equipment, or foot traffic common in high-use commercial corridors.

Heavy-Duty Drawer Slides
Rated for frequent, repeated use well beyond what a home kitchen drawer sees in a week.

Antimicrobial Surface Coating
A practical add for medical offices or food-adjacent spaces where surface hygiene matters daily.

Commercial Hardware Sets
Selected for long-term performance under constant use, not just appearance.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Commercial Cabinet Refacing Take?
Commercial timelines depend heavily on access windows and square footage, more than material choice.
- 01
Site walkthrough and quote
same week
- 02
Material lead time
1–2 weeks - 03
Install
2–5 daysdepending on cabinet run length and access hours
Need a schedule that fits?
Get a Free EstimateCost
What Does a Commercial Cabinet Refacing Cost in Temple Terrace?
Commercial pricing tracks cabinet linear footage, material grade, and whether work happens during or outside business hours. Call (727) 334-7614 for a free estimate scoped to your property.
| Project type | Typical range | What’s included |
|---|---|---|
| Single break room or small unit | $1,500–$4,500 | standard laminate and hardware swap. |
| Multi-unit or office suite | $5,000–$15,000 | commercial laminate across several rooms. |
| Full-building rollout | $15,000+ | coordinated scheduling across multiple spaces with durable material specs. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and Codes for Commercial Cabinet Refacing
Verify specifics with Hillsborough County before scheduling if your project touches plumbing or electrical.
| Typically needs a permit | Often no permit |
|---|---|
| Work that alters plumbing fixtures tied to cabinet runs | Cosmetic door |
| Any structural change to walls or load-bearing elements | drawer front |
| Electrical relocation for under-cabinet fixtures | veneer replacement |
| — | Hardware upgrades and hinge swaps |
| — | Surface refinishing without structural changes |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Commercial Cabinet Refacing
| DIY | Hire a pro |
|---|---|
| Swapping basic pulls or knobs on a small number of units | Matching finish and hardware consistently across multiple rooms or units |
| Minor touch-up finish work on low-traffic cabinets | Scheduling around tenant or business hours without shutting operations down |
| Reordering supplies you already know fit your hardware | Specifying commercial-grade materials rated for the actual traffic load |
| — | Coordinating larger multi-unit jobs where box condition varies room to room |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Commercial Cabinet Refacing
Call (727) 334-7614 for a free estimate, or request one through the contact form.
- Cabinets across a rental or office show inconsistent wear from tenant turnover
- Laminate is chipping or peeling in high-traffic break rooms
- You're prepping a unit or suite for a new tenant and need a fast turnaround
- Hardware is loose or failing across multiple cabinet runs
Seeing warning signs?
Get a Free EstimateFAQs
Commercial Cabinet Refacing FAQs
How much does commercial cabinet refacing cost in Temple Terrace?
Most jobs run from $1,500 for a single break room up to $15,000+ for a full-building rollout, depending on linear footage and material grade.
How long does commercial cabinet refacing take?
A single unit usually takes 2-5 days once materials arrive. Larger properties get scheduled in phases to keep operations running.
Can you work outside business hours?
We coordinate with property managers and business owners to schedule around operating hours when needed.
Do I need a permit for commercial cabinet refacing?
Cosmetic refacing generally doesn't require a permit. If plumbing or electrical gets touched, check with Hillsborough County first.
Is commercial-grade material really necessary?
Yes. Standard residential laminate and hinges wear out fast under heavy daily traffic. Commercial-grade hardware and surfaces hold up longer under that load.
Can you match cabinets across multiple units or rooms in one building?
We spec materials and finishes consistently across a property so everything matches regardless of room-to-room box condition differences.
More services
Other Cabinet Refacing services

Cabinet Refacing
Cabinet refacing in Temple Terrace with new doors, box veneer, and hardware matched to your kitchen. Free estimates, honest timelines.

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Temple Terrace, full-kitchen door and veneer updates without a full remodel. Free estimates available.

Bathroom Vanity Refacing
Bathroom vanity refacing in Temple Terrace with moisture-resistant finishes built for humid conditions. Free estimates.
Ask about Commercial Cabinet Refacing
Tell us about the project and how to reach you.